Golf Simulator Room Fit Checker

Ceiling height is the one number that decides whether a golf simulator works in your space at all — width and depth are usually solvable with a smaller screen or a tighter stance, but a low ceiling clips your swing plane no matter how the rest of the room is arranged. It also varies more than most buyers expect: the launch monitors we review specify anywhere from 8 ft (Foresight GC Quad, the one unit built to tolerate a genuinely low ceiling) to 10 ft (FlightScope Mevo+) as their manufacturer-stated minimum, so the same room can be a comfortable fit for one unit and a no-go for another.

Where a launch monitor sits relative to the ball matters almost as much. Radar units (FlightScope, Garmin R10, Rapsodo MLM2PRO, Full Swing KIT) sit 6–8.5 ft behind the ball to track the full flight path, which pushes total room depth to 14–18 ft. Side-mounted cameras (SkyTrak+, Bushnell Launch Pro, Foresight GC3/GC Quad, Uneekor EYE MINI, Garmin R50) sit 2–3 ft to one side instead, so they fit in 10–12 ft of depth but need a shoulder-height unit positioned on the correct side for a right- or left-handed swing. Overhead units (ProTee VX, TrackMan iO, Uneekor EYE XO2, VTrack) mount above the hitting area entirely, trading a taller ceiling requirement for a setup that works for either-handed golfers without moving anything.

Use the checker below to enter your actual room dimensions and technology preference, or jump straight to the reference table and the 8 ft / 9 ft ceiling breakdowns if you already know your ceiling is the limiting factor.

How we calculate fit / tight / no fit: Every figure in this tool comes straight from each product's own manufacturer-sourced space data — a manufacturer-sourced minimum ceiling, depth, and width for that specific unit — not a single rule-of-thumb applied to every product. We classify your room against each launch monitor's minimum on all three dimensions independently: No fit means your value is below the manufacturer's stated minimum for that dimension. Tight means your value meets the minimum but falls within 0.5 ft of it — technically workable, per the source, but with no buffer for a screen that hangs slightly low or a swing that runs a little wide. Fit means your value clears the minimum by at least 0.5 ft. A product's overall verdict is the worst of its three per-dimension verdicts — one no-fit dimension makes the whole setup a no-fit, even if the other two are comfortable. Depth minimums already include stance-and-swing clearance behind the player, the flight-to-screen distance, and screen clearance, plus — for units that sit behind the ball — the manufacturer's own behind-ball offset; see each product's review for the individual source. Left- or right-handed play changes nothing in this math for behind- or overhead-mounted units, but a side-mounted unit has to sit on the side opposite your swinging hand, so a room built for a right-handed golfer needs the unit moved (and usually recalibrated) for a left-handed one.