Best Golf Impact Screen
By GolfSimulatorSource Editorial Team | Last updated:
The impact screen is the one part of a golf simulator that takes every shot you hit, and it is also the part where a $200 difference in price buys the most noticeable change. A basic single-layer screen stops the ball and shows a usable picture. A spacer-mesh three-layer screen does the same job with a smoother image, less rebound off the surface, and a much quieter thud, which matters a lot if the room shares a wall with a bedroom.
This guide ranks seven impact screens from four sellers: Shop Indoor Golf (SIGPRO Premium and SIG Preferred), Carl's Place (Premium with the High-Contrast Gray option, Preferred, and Standard), Rain or Shine Golf (its made-to-order RoS screen in single-layer and triple-layer versions), and AllSportSystems (a budget standard screen that ranks last despite the lowest price, because the fabric and layer count are not published). Prices below were read from each retailer's own product page on October 3, 2026, and every one is quoted for a stated size so the numbers can actually be compared. We use 8 x 10.5 ft in the 4:3 shape, the most common DIY size, wherever the seller offers it.
We do not physically test screens. We rank on material tier as published by the manufacturer, community evidence on noise and bounce-back, size and color options, warranty terms, and price per square foot. Image-quality statements from sellers are marketing claims, and we label them that way.
Our Top 7 Picks
SIGPRO Premium Impact Screen
$569.99 (8 x 10.5 ft, 4:3, screen only)
A three-layer spacer-mesh screen with a one-year warranty, priced below the equivalent Carl's Place Premium and Rain or Shine triple-layer screens at the same size.
Best for: A projector room where picture quality and a quiet impact matter and the budget allows about $570 for the screen
- Material
- Three-layer: two polyester faces around vertical spacer yarns
- Sizes
- 7'7" to 10 ft tall; 1:1, 4:3, 16:10, 16:9
- Edges and mounting
- Double-stitched black vinyl edge with grommets; hook-and-loop sewn around the perimeter
- Warranty
- 1 year, residential use (rips and tears)
- Image claim
- Up to 4K quality (manufacturer claim)
- Two tight-knit polyester surfaces sandwich vertical spacer yarns, a three-layer build that the manufacturer says is aimed at image quality, longevity, bounce-back, and noise
- One-year warranty on rips and tears for residential use, the longest published screen warranty among the picks
- About $6.79 per square foot at 8 x 10.5 ft, the lowest price per square foot of the three-layer picks
- Sold in 1:1, 4:3, 16:10, and 16:9 shapes from 7'7" to 10 ft tall, including the sizes that match the SIG8, SIG10, and SIG12 enclosures
- The manufacturer cites head-to-head testing by MyGolfSpy as proof of durability, noise, and bounce-back; we did not verify that test, so treat it as a seller claim
- White only here. The gray version is a separate product, the SIGPRO Premier, listed at $929.99 for the same size
- Screen only: no frame, bungees, or side netting included
Carl's Place Premium and High-Contrast Gray
$598.95 (8 x 10.5 ft, Classic edge, screen only; white or gray)
Carl's Place's three-layer screen with a noise-dampening center layer, available in white or a High-Contrast Gray version that costs little or nothing extra at most sizes.
Best for: A room with ambient light, such as a garage with windows or a basement with overhead lights, where a gray screen helps contrast
- Material
- Three layers of polyester with a noise-dampening center layer
- Sizes
- 7.7 x 7.7 ft to 10 x 18 ft; 1:1, 4:3, 16:10, 16:9; custom available
- Color
- White (Premium) or High-Contrast Gray
- Edges and mounting
- 2.5 in black vinyl edge, sewn grommets; flaps or loop fastener optional
- Image claim
- Smoothest surface, superior image quality (manufacturer claim)
- Three layers of heavy-duty polyester with a noise-dampening center layer, per the manufacturer
- With the Classic edge, gray costs $0 to $21 more than white depending on size; at 8 x 10.5 ft the two are the same $598.95
- Widest choice of standard shapes (1:1, 4:3, 16:10, 16:9) plus custom sizing, from 7.7 x 7.7 ft up to 10 x 18 ft
- Three edge finishes: Classic grommets, Classic with Flaps, or Classic with Loop Fastener, so the screen can take bungees, safety cushions, or curtains
- About $7.13 per square foot at 8 x 10.5 ft, roughly 5 percent more per square foot than the SIGPRO Premium
- Flaps and loop finishes add money: at 8 x 10.5 ft, Premium rises to $654.95 with flaps or $619.95 with loop fastener
- Screen only, and the listing does not publish a warranty term
RoS Golf Simulator Screen
$599 triple-layer (8 x 10.5 ft, 4:3, screen only); $399 single-layer
A made-to-order screen sold in a single-layer and a triple-layer version, with a one-inch loop surround that fits standard frames and bungees.
Best for: Buyers who want one seller, a choice of single or triple layer, and a screen cut to an exact size
- Material
- Single-layer silicone-reinforced polyester, or triple-layer with noise-dampening center
- Sizes
- 7.7 to 10 ft tall; 1:1, 4:3, 16:9, 16:10
- Edges and mounting
- 1 in finished loop surround (bungees, hook tape, frames)
- Ball-speed rating
- 250 mph (manufacturer claim)
- You choose the material: single-layer polyester with silicone reinforcement at $399, or triple-layer with a noise-dampening center layer at $599, both at 8 x 10.5 ft
- Made to order from 7.7 ft to 10 ft tall in 1:1, 4:3, 16:9, and 16:10, and the seller states it is made in the USA from domestically sourced material
- Finished 1 in loop surround ships standard and is compatible with bungees, hook tape, and standard enclosure frames including the SwingBay
- Made to order, with shipping stated as 2 to 3 weeks after the order, longer than an in-stock screen
- The triple-layer version is priced the same as the Carl's Place Premium at this size and about $29 above the SIGPRO Premium
- The screen is made to order and all sales are final, as stated on its page
- The product page does not state a warranty term or color options beyond the standard screen
SIG Preferred Finished Impact Screen
$348.49 (8 x 10.5 ft, 4:3, screen only; sale, $409.99 list)
A single-layer reinforced polyester screen from Shop Indoor Golf, the least expensive way to get a finished, grommeted, warranted screen with mid-tier weave and treatment.
Best for: Residential setups that want a step up from a basic screen without paying three-layer money
- Material
- Single layer, reinforced, tightly woven polyester
- Sizes
- 7'7" to 10 ft tall; 1:1, 4:3, 16:10, 16:9
- Edges and mounting
- Double-stitched black vinyl edge with grommets
- Warranty
- 6 months, residential use (rips and tears)
- Tightly woven polyester with reinforcement treatment, finished with double-stitched black vinyl edges and grommets
- About $4.15 per square foot at the current sale price, the lowest of the mid-tier and three-layer picks
- 6-month warranty on rips and tears for residential use
- Single layer, so expect more noise and rebound than the spacer-mesh screens; this is the budget version of the SIGPRO Premium by design
- The manufacturer does not recommend it for commercial settings
- Sale pricing can change; the strike-through regular price is $409.99
Carl's Place Preferred
$398.95 (8 x 10.5 ft, Classic edge, screen only)
Carl's Place's middle tier: a tightly woven, silicone-reinforced polyester screen that the manufacturer says gives a smoother surface than Standard. Carl's does not publish a layer count; a third-party guide classes it as single-layer.
Best for: Builders who already plan around a Carl's Place enclosure kit and want a better picture than the base screen
- Material
- Tightly woven, silicone-reinforced polyester (layer count not published by Carl's; a third-party guide classes it as single-layer)
- Sizes
- 7.7 x 7.7 ft to 10 x 18 ft; 1:1, 4:3, 16:10, 16:9; custom available
- Weave
- Tightly woven knit with strong silicone reinforcement
- Edges and mounting
- 2.5 in black vinyl edge, sewn grommets; flaps $454.95 and loop $419.95 at 8 x 10.5 ft
- Silicone reinforcement and a tight knit for a smoother surface than the Standard screen, per the manufacturer
- Same size range and edge finishes as the Premium: 7.7 x 7.7 ft to 10 x 18 ft, three edge styles, custom sizing
- Available from both Carl's Place and Rain or Shine Golf at the same 8 x 10.5 ft price
- About $4.75 per square foot, higher than the SIG Preferred at its current sale price for a similar mid-tier build
- Not described as having a spacer center (the Premium tier does), so the noise and bounce-back advantages of the Premium tier should not be assumed
- No warranty term on the listing
Carl's Place Standard
$239.95 (8 x 10.5 ft, Classic edge, screen only; from $179.95 at 7.7 x 7.7 ft)
Carl's Place's entry screen: 100 percent heavy-duty polyester, loosely woven, with finished vinyl edges and grommets, aimed at beginners and practice use.
Best for: Practice-focused or net-style setups where a low price matters more than a sharp projected image
- Material
- 100% heavy-duty polyester, loosely woven (layer count not published by Carl's)
- Sizes
- 7.7 x 7.7 ft to 10 x 18 ft; 1:1, 4:3, 16:10, 16:9; custom available
- Edges and mounting
- 2.5 in black vinyl edge, sewn grommets; flaps $294.95 and loop $254.95 at 8 x 10.5 ft
- Image claim
- Budget material for beginners (manufacturer description)
- About $2.86 per square foot at 8 x 10.5 ft, a fraction of the three-layer picks
- Same standard sizes, shapes, and edge finish options as the other Carl's Place tiers
- Starts at $179.95 for the smallest 7.7 x 7.7 ft size
- Loosely woven by the manufacturer's own description, and a third-party buying guide describes this type of open-weave screen as giving a grainy picture, louder impact, and more bounce-back than premium screens
- The "from $179.95" price is the smallest size only; the common 8 x 10.5 ft size is $239.95
- No warranty term on the listing
AllSportSystems Standard Golf Impact Screen
$190 (8 ft tall x 10 ft wide, screen only; sale, $240 list)
A manufacturer-direct standard screen, trimmed in black vinyl with grommets, that undercuts every other pick on price per square foot. It ranks last despite the lowest price because the seller does not publish the fabric or the layer count, so we cannot place it in a material tier.
Best for: Replacing a worn screen or building on the tightest budget when the exact material is not a priority
- Material
- Standard screen; layers and fabric not published on the page
- Sizes
- 6 to 10 ft tall by 9'6" to 18 ft wide (height-by-width grid)
- Edges and mounting
- Black vinyl trim with black grommets all around
- Made
- Fabricated in-house by the seller
- About $2.38 per square foot at 8 x 10 ft, the lowest of the picks
- Sold in a wide height-by-width grid: 6 to 10 ft tall and 9.5 to 18 ft wide, which suits wide 16:9 builds
- Optional Sky Bridge brackets, tension system, and replaceable impact strips are sold by the same company
- The product page does not state the fabric, layer count, or color, so we cannot place it in a material tier; the seller sells separate Premium Single Ply and Elite Multilayer screens
- No 8 x 10.5 ft size and no fixed aspect ratios; you pick a height and a width, so check that the projected image fits
- No warranty term on the listing
Buying Guide
The three material tiers, and what the spacer layer does
Almost every impact screen sold for home simulators falls into one of three tiers, and the tier matters more than the brand.
Entry, open weave. A loosely woven polyester sheet, typically a single layer. Carl's Place describes its Standard screen as 100 percent heavy-duty polyester, loosely woven, and the third-party buying guide at Home Performance Lab says entry screens of this type are rated for high ball speeds but give a grainy projected image, with higher bounce-back and louder impact noise than premium screens. It is the right choice for practice and net-style use and a poor one for a sharp projected course.
Mid-tier, tight weave, reinforced. A tighter weave with a silicone or similar treatment, such as Carl's Place Preferred, SIG Preferred, and the single-layer RoS screen. The sellers describe a smoother surface and better durability. Carl's Place does not publish a layer count for Preferred (Home Performance Lab classes it as single-layer), but without a spacer center the physics of noise and rebound are closer to entry than to premium.
Premium, three layers with spacer yarns. Two polyester faces with vertical spacer yarns between them, sometimes called poly spacer or spacer mesh. SIGPRO Premium, Carl's Place Premium, and the RoS triple-layer screen all use this construction. The spacer center acts as a cushion that absorbs impact energy, which is why premium screens are the ones sellers promote for lower noise and less bounce-back. It also gives the smoothest face for projection. Expect to pay roughly 1.4 to 1.7 times the mid-tier price at the same size.
Image quality, noise, and durability: what owners report
Seller descriptions agree that thicker, smoother screens give a better picture. We treat those as marketing claims. The independent evidence we can cite is about noise.
On GolfSimulatorForum's "Please help! Loud Impact Screen" thread, user Pye2408 described an Amazon screen the seller called 100 percent heavy-duty polyester, on September 17, 2021: "However, when the ball was impacting the screen, it was quite loud like a drum playing next to my ears." They added that loosening tension, removing bungees, and hanging backing support did not help. On September 22, 2021, user schwame replied: "My original impact screen was very loud. The kids two rooms away from the simulator could hear." After moving to a poly spacer screen, they wrote that "the impact sound is dramatically reduced... like 90% or more."
Two caveats. These are single-owner reports, not measurements, and "90% or more" is a subjective estimate. And schwame bought from a different seller than any pick here, so the evidence supports the spacer construction in general, not one product; the seller schwame praised also posted in the same thread, which makes it a seller-adjacent testimonial. Still, it matches what the manufacturers and Home Performance Lab say about the construction, and it is the strongest argument for the three-layer tier if the room shares walls.
On durability, the only hard terms we found are warranties: one year on the SIGPRO Premium and six months on SIG Preferred, both for residential use and only when the screen is used as intended. Shop Indoor Golf's warranty language lists memory foam or weighted blankets touching or too close to the screen as improper use, because they concentrate impact and wear the screen faster. Hang padding with a gap behind the screen, not against it.
White or gray?
Gray screens trade a little brightness for contrast. Home Performance Lab says gray screens absorb about 40 percent more ambient light than white ones, which gives deeper blacks and less washout in rooms with overhead lighting (source). We could not verify the 40 percent figure ourselves, so read it as that site's estimate.
The practical rule: in a dark, dedicated room, white gives the brightest picture and the best use of a modest projector. In a garage with windows, a basement with overhead lights, or any room you cannot fully darken, gray is worth considering, and a brighter projector helps either way. See the lumens section of our projector roundup.
Gray is cheap at Carl's Place: with the Classic edge, the High-Contrast Gray version of the Premium costs between $0 and $21 more than white depending on size, and the two are the same $598.95 at 8 x 10.5 ft (with the Flaps edge the gray upcharge is $14 to $51). At Shop Indoor Golf, gray is a separate product, the SIGPRO Premier, at $929.99 for the same size versus $569.99 for SIGPRO Premium, so the choice there is a real budget decision.
Size, aspect ratio, and the projector
The common DIY sizes are 8 x 10.5 ft, 9 x 12 ft, 8 x 14 ft, and 9 x 16 ft. The first two are 4:3, which suits narrower rooms because it keeps screen height without needing width. The last two are 16:9, which is the standard for most simulator software but needs a wider room. Carl's Place, Rain or Shine, and Shop Indoor Golf also sell 16:10 and 1:1 shapes. Match the screen shape to your projector and software before ordering; our projector roundup explains how aspect ratio mismatches show up as black bars or a cropped image.
Two cautions. First, sizes are quoted edge to edge, including the vinyl border and grommets, so the usable image area is smaller than the headline size; check each seller's specification chart. Second, the size has to fit the room before it fits the projector. A wider screen also moves the projector farther back, changing the room depth you need. Run your real ceiling height, width, and depth through the Room Fit Checker or read the Room Size Guide before you pick a size.
Price rises with size. At Carl's Place, Standard goes from $179.95 at 7.7 x 7.7 ft to $398.95 at 10 x 18 ft, and Premium from $439.95 to $1,034.95 across the same range.
Tensioning and safety
Mount an impact screen with ball bungees through the grommets, not drum-tight. The bungees let the screen give inward on impact, absorb the energy, and return to flat. A screen pulled tight like a trampoline sends the ball back toward you and wears out sooner. Some screens add loop-fastener edges for attaching netting or cushions. Our DIY Golf Simulator Build Guide covers the tensioning order: corners loosely first, then side midpoints, then outward from the center.
Leave a gap behind the screen so it can flex. Home Performance Lab recommends at least 12 inches behind a screen tensioned on all sides and about 20 inches for a screen hanging freely from the top. Keep any foam or blankets spaced from it rather than touching it. Our enclosure roundup covers the gap, safety baffles, and how a GolfSimulatorForum member fixed rebound on short irons and wedges with more bungees and padding near the top of the screen.
Three of the four sellers here (Shop Indoor Golf, Carl's Place, and Rain or Shine) quote a 250 mph ball-speed rating. That is a manufacturer claim, not an independent test. Treat any screen as a consumable and plan for the warranty terms above.
What's included, and price per square foot
Every pick here is the screen only. None includes a frame, bungees, side netting, or projector. If you want a frame, see the enclosure roundup, and for total build cost see the Golf Simulator Cost Guide. Bungees are cheap, and Carl's Place sells 6 inch and 9 inch ball bungees in any quantity. If the screen will hang in a garage, our garage, shed, and outdoor guide covers space and lighting issues.
Price per square foot at 8 x 10.5 ft (84 square feet) shows how tiers compare: Carl's Place Standard about $2.86, SIG Preferred at its sale price about $4.15, Carl's Place Preferred and the single-layer RoS about $4.75, SIGPRO Premium about $6.79, and Carl's Place Premium and the RoS triple-layer about $7.13. AllSportSystems at 8 x 10 ft (80 square feet) is about $2.38. A three-layer screen costs roughly two to three times as much per square foot as a standard one. The extra money is spent on noise, rebound, and image.
Frequently Asked Questions
What is the difference between a single-layer and a three-layer impact screen?
A single-layer screen is one sheet of woven polyester, sometimes with a silicone reinforcement. A three-layer screen puts vertical spacer yarns between two polyester faces. The manufacturers say the spacer layer cushions the impact for less noise and rebound and gives a smoother face for the projected image. Owner reports on GolfSimulatorForum describe a large drop in noise after switching to a spacer screen.
Which impact screen is best for a quiet room?
The three-layer spacer-mesh tier is the best bet: SIGPRO Premium, Carl's Place Premium, or the Rain or Shine triple-layer screen. A forum owner who upgraded from a loud screen to a poly spacer screen reported the impact sound dropped by "90% or more," although that is one owner's estimate, not a measurement. Hanging padding behind the screen with a gap also helps.
Should I buy a white or a gray golf impact screen?
White gives the brightest picture in a dark room. Gray absorbs more ambient light, which gives better contrast in a room with windows or overhead lights; one third-party buying guide puts the difference at about 40 percent more ambient light absorbed. At Carl's Place the Premium screen in gray costs $0 to $21 more than white with the Classic edge, depending on size. At Shop Indoor Golf the gray SIGPRO Premier costs $360 more than the white SIGPRO Premium at 8 x 10.5 ft.
What size impact screen do I need?
The most common DIY sizes are 8 x 10.5 ft and 9 x 12 ft in 4:3 for narrower rooms, and 8 x 14 ft and 9 x 16 ft in 16:9 for wider ones. Pick the shape that matches your projector and software, then check that the screen plus swing clearance fits your ceiling height, width, and depth. Remember that sizes include the border, so the usable image is smaller.
How tight should I pull an impact screen?
Not tight. Use ball bungees through the grommets so the screen can give on impact and spring back. A drum-tight screen acts like a trampoline and sends the ball back at you. Leave a gap behind the screen (one third-party guide recommends at least 12 inches for a screen tensioned on all sides, about 20 inches for one hanging freely from the top) and keep foam or blankets spaced from its surface.
Does the price include a frame or netting?
No. Every screen in this roundup is screen only, with finished edges and grommets or loop fasteners but no frame, bungees, side netting, or projector. Carl's Place also offers Classic with Flaps and Classic with Loop Fastener edge finishes that cost more and let you attach safety cushions, curtains, or netting. See our enclosure roundup for frame options.
Is a cheap screen good enough to start with?
For practice or a net-style setup, yes. Carl's Place Standard at $239.95 for 8 x 10.5 ft or AllSportSystems at $190 for 8 x 10 ft will stop the ball. Expect a grainier picture and more noise and rebound than the premium tier, per Carl's Place's own loosely woven description and a third-party buying guide. If you plan to project a course and play often, the SIG Preferred at $348.49 sale or a three-layer screen is the better long-term buy.
More Accessory Guides
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission at no extra cost to you. Our rankings and verdicts are not influenced by commercial relationships. Full disclosure policy
Get Price Alerts and New Reviews
We track price changes across launch monitors and simulator accessories. Subscribe for alerts when prices drop or new picks are added.