Best Projector for a Golf Simulator
By GolfSimulatorSource Editorial Team | Last updated:
A golf simulator projector lives or dies on one spec most buyers never check: throw ratio. Get that wrong and even a "great" home-theater projector won't focus a sharp, correctly sized image from the distance your room actually gives you — no amount of lumens or 4K resolution fixes a throw ratio that doesn't fit.
This guide ranks seven projectors that are sold specifically for golf simulator use, using manufacturer-published specs (throw ratio, lumens, input lag) cross-checked against multiple retailers as of September 2026. We don't personally test these units — we aggregate manufacturer specifications, retailer listings, and independent buying guides, and flag it explicitly wherever sources disagree on a number.
Two models often mentioned alongside golf-specific projectors — the Epson Home Cinema 3800 and the AWOL Vision LTV-3500 Pro — are not included as full picks. Neither is short-throw enough (or golf-specific enough) to recommend over the dedicated models below; see the buying guide for why.
Our Top 7 Picks
BenQ AK700ST
$2,899
BenQ's newest golf-specific 4K laser projector — the only pick in this roundup that pairs 4K resolution with a laser light source at this price, without dropping to 1080p.
Best for: A room with roughly 11-13 ft in front of the screen that still wants 4K
- Lumens
- 4,000 (laser)
- Resolution
- 4K UHD
- Throw ratio
- 0.69-0.83:1
- Input lag
- 16.7 ms @ 1080p/120Hz
- 4K UHD resolution with a laser light source (20,000+ hour rated life, no lamp swaps)
- 0.69-0.83:1 throw ratio — same short-throw band as the TH671ST and TK710STi, fits an 11-13 ft room depth on a 12 ft screen
- 16.7 ms input lag at 1080p/120Hz, per BenQ specs
- The most expensive pick here short of the LK936ST flagship
- Needs roughly 11-13 ft of room depth for a 12 ft screen — deeper than the true ultra-short-throw picks (GT2000HDR, ZH450ST) at 0.496:1
BenQ TH671ST
$949
The most widely stocked entry-level golf projector, and the model most simulator retailers point first-time builders toward.
Best for: Budget builds that are fine with 1080p
- Lumens
- 3,000 (lamp)
- Resolution
- 1080p
- Throw ratio
- 0.69-0.83:1
- Input lag
- 16.67 ms
- Lowest verified price in this roundup
- 16.67 ms input lag, confirmed across multiple retailer spec sheets
- Stocked by nearly every simulator retailer — parts and support are easy to find
- Lamp-based, not laser — budget for a $200-400 lamp replacement every 3,000-5,000 hours
- 1080p only, no 4K option
BenQ TK710STi
$2,199
4K resolution without the LK936ST's flagship price — the tradeoff is the lowest laser brightness in this roundup.
Best for: A mid-range budget for 4K specifically
- Lumens
- 3,200 (laser)
- Resolution
- 4K UHD
- Throw ratio
- 0.69-0.83:1
- Input lag
- 4 ms @ 1080p/240Hz
- 4K laser at roughly $2,700 less than the LK936ST
- Input lag as low as 4 ms at 1080p/240Hz (8 ms at 120Hz, 16 ms at 4K/60Hz), per BenQ specs
- Same throw-ratio range as the TH671ST, so room-planning carries over between the two
- 3,200 lumens is the lowest laser brightness here — check for daylight in the room before buying
- Street price varies by retailer — confirm the live price before buying
Optoma GT2000HDR
$1,199 (sale; $1,499 list)
One of only two true ultra-short-throw picks in this roundup (alongside the ZH450ST), at roughly 40% of the AK700ST's price, trading 4K for 1080p.
Best for: Rooms with only 8-9 ft of depth in front of the screen
- Lumens
- 3,500 (laser)
- Resolution
- 1080p
- Throw ratio
- 0.496:1
- Input lag
- ~8.6 ms @ 1080p/120Hz
- 0.496:1 throw ratio — one of only two picks here (with the ZH450ST) that fits ~5.9 ft from a 12 ft screen
- ~8.6 ms input lag at 1080p/120Hz
- Sale price undercuts every laser 4K pick in this roundup
- 1080p, not 4K
- 3,500 lumens is on the lower end — pair with a darker room or block daylight if the garage door lets in a lot of light
BenQ LK936ST
$4,899
The brightest laser projector in this roundup by a wide margin, built for dedicated or commercial rooms with ambient light.
Best for: Bright garages or commercial bays that need maximum lumens
- Lumens
- 5,100 (laser)
- Resolution
- 4K UHD
- Throw ratio
- 0.81-0.89:1
- 5,100 lumens — brightest pick here, well ahead of the next-brightest ZH450ST
- 4K laser, and its longer throw-ratio range also works in deeper rooms
- Repeatedly cited as the 'flagship' pick for dedicated sim rooms across buying guides
- Nearly 5x the price of the TH671ST budget pick
- Needs roughly 12-14 ft of room depth for a 12 ft screen — more than the TH671ST/TK710STi's 11-13 ft, due to its longer throw-ratio range
Optoma ZH450ST
$2,289 (sale; $2,869 list)
A 4,200-lumen 1080p laser that independent buying guides rank as the top full-HD pick, at roughly 20% below its list price.
Best for: Bright rooms that do not need 4K
- Lumens
- 4,200 (laser)
- Resolution
- 1080p
- Throw ratio
- 0.496:1 (per retailer listing)
- 4,200 lumens — brighter than both the GT2000HDR and TK710STi
- Laser light source, no lamp replacement cost
- Independently named 'Best Full HD' pick by mygolfsimulator.com's 2025/2026 buying guide
- Sale price moves — it's roughly 20% off the $2,869 list price as of late September 2026, but confirm the live price at checkout before treating either number as fixed
- Throw ratio is reported at 0.496:1 in some retailer listings — verify against the specific SKU you order
BenQ AH700ST
$2,299 (sale; $2,499 list)
BenQ's newer laser 1080p model, currently priced above its own original MSRP — worth a look only after comparing it directly against the TK710STi and ZH450ST.
Best for: Buyers set on BenQ laser reliability at 1080p specifically
- Lumens
- 4,000 (laser)
- Resolution
- 1080p
- Throw ratio
- 0.69-0.83:1 (per retailer listing)
- Laser light source at 4,000 lumens
- 20,000+ hour rated laser life, no lamp replacement cost
- Street price ($2,299) sits about $400 above this model's own original MSRP ($1,899) — an unusual pattern worth double-checking before buying
- No independent editorial source in our research specifically recommends this model over the TK710STi or ZH450ST at this price point
Buying Guide
Throw ratio: the spec that decides everything else
Throw ratio = throw distance ÷ screen width, measured from the front of the lens (not the projector body) to the screen. It's the single most important number for a simulator room, because it determines whether a projector can even focus a correctly sized image at the distance your room provides.
For golf simulators, a throw ratio of 0.5-1.1:1 works, with a sweet spot around 0.8:1 (mygolfsimulator.com). Multiply a projector's throw ratio by your screen's width to get the distance it needs from the screen, then add 2-3 ft of clearance for the player and launch monitor to get the room depth you actually need. If you have not measured your room yet, start with our room size guide.
0.496:1 (GT2000HDR, ZH450ST): about 5.9 ft from a 12 ft screen, so 8-9 ft of room depth is enough.
0.69-0.83:1 (TH671ST, TK710STi, AK700ST, AH700ST): 8.3-10 ft from a 12 ft screen, so plan on 11-13 ft of room depth.
0.81-0.89:1 (LK936ST): 9.7-10.7 ft from a 12 ft screen, so plan on 12-14 ft of room depth.
1.13-1.46:1 (standard throw, non-UST): 13.6-17.5 ft from a 12 ft screen, so plan on 16-20 ft of room depth.
Most garage or basement bays are 10-14 ft deep — which means only the ultra-short-throw (UST, ≤0.5:1) and short-throw (≤0.9:1) categories in this roundup actually fit. A standard-throw home-theater projector, even a great one, usually needs more room than a typical bay provides.
Aspect ratio: match the projector to your impact screen
Impact screens come in three common aspect ratios, and picking the wrong one causes black bars or a cropped image regardless of how good the projector is:
- 16:9 — the most common choice for wider rooms and the standard aspect ratio for GSPro and E6 Connect.- 4:3 — better for narrower rooms (roughly 13 ft or less wide), since it preserves screen height without needing extra width.- 16:10 — a compromise used by a few projectors (e.g. BenQ's LU-series), but it needs a longer installation distance and fits fewer small rooms.
Check your simulator software's screen setting against your projector's native aspect ratio before buying — a mismatch shows up as black bars or a cropped ball-flight image, not just a minor letterboxing annoyance.
Lumens: how bright you need it depends on the room, not the screen
3,000-3,500 lumens is enough for a dark, dedicated room. Most garage or basement simulator rooms — with some ambient light — need 4,000-5,000 lumens. Rooms with skylights, uncovered garage doors, or other daylight exposure should aim for 5,000+ lumens or plan to block that light.
Laser projectors hold their rated brightness for their full 20,000+ hour life; lamp-based projectors dim gradually as the lamp ages, so a lamp unit's "3,000 lumens" spec is really its brightest day-one output, not a number you can count on years in.
Input lag: less critical than it looks
Every projector in this roundup measures under 20 ms of input lag (4-16.7 ms depending on model and resolution/refresh setting). For context, a typical TV runs over 20 ms. That gap matters a lot for fast-paced console/PC gaming, but far less for simulator golf: your launch monitor's sensor detects the shot, and the simulator software (GSPro, E6 Connect) renders the ball flight from that data — the projector isn't reacting to a button press in real time the way a shooter or fighting game requires. Don't let input lag be a tiebreaker between two projectors that are otherwise a better or worse fit on throw ratio and lumens.
Laser vs. lamp
Laser light sources are rated for 20,000+ hours at a constant brightness with no dimming curve. Lamp-based projectors (like the TH671ST) run 3,000-5,000 hours before a lamp swap, at $200-400 per replacement lamp, and dim gradually over that life rather than staying at full rated brightness. The EU's move away from mercury lamps is also pushing the market toward laser overall. Laser costs more up front, but the total cost of ownership over several years often favors it once you account for lamp replacements on a lamp-based unit.
Ceiling mount vs. floor mount — and the safety case for ceiling
Ceiling-mounted projectors are the safer choice: floor-mounted units sit in the path of a mis-hit ball or club, and community experience backs this up directly.
One owner described what happened with a floor-adjacent setup on GolfSimulatorForum: "With my original setup I would tag the projector with short iron follow throughs every now and again... was very disconcerting!!!" (gnomike, GolfSimulatorForum thread, Feb 2020). They solved it by recessing the ceiling mount into the ceiling itself, recovering 8-10 inches of clearance. Another user in the same thread, mounting an Optoma GT1080HDR in a 9.5 ft garage, offered this rule of thumb: mount the projector centered over the hitting line, positioned "two-feet closer to the screen than the hitting area" (tron, GolfSimulatorForum thread, Feb 2020).
A separate forum thread reached the same consensus from a different angle. One user summed up the community view plainly: "Ceiling mount is always preferable if at all possible." (GungHoGolf, GolfSimulatorForum thread, Dec 2020). Another added the specific rule that makes a floor mount workable when ceiling mounting genuinely isn't an option: "If you can mount it directly over the ball it shouldn't be in your clubs path." (spaz, GolfSimulatorForum thread, Dec 2020).
Center-mounting on the screen's midline also reduces keystone distortion, which otherwise forces a digital correction that can visibly soften the image — a tradeoff one forum user described directly after using keystone adjustment to compensate for an off-axis mount.
Frequently Asked Questions
What throw ratio do I need for a golf simulator projector?
Throw ratio = throw distance ÷ screen width. For most simulator rooms with a 10-14 ft depth budget, look for a throw ratio of 0.4-0.9:1 (ultra-short or short throw). A standard-throw projector (1.1:1+) typically needs 16-20 ft of room depth for a 12 ft screen, which most garages and basements do not have.
Do I need a 4K projector, or is 1080p enough?
1080p is enough for most simulator golf — you're watching ball flight and course graphics, not reading fine text. 4K sharpens fine detail (grass texture, distant scenery) but costs significantly more at a given lumen/throw-ratio spec, as the price gap between the 1080p TH671ST (~$950-1,000) and the 4K AK700ST ($2,899) in this roundup shows.
How many lumens do I need for a garage golf simulator?
Aim for 4,000-5,000 lumens for a typical garage or basement bay with some ambient light. A fully darkened, dedicated room can get away with 3,000-3,500 lumens. Rooms with daylight exposure (windows, an uncovered garage door) should target 5,000+ lumens or block that light source.
Can I use any projector for a golf simulator, or does it need to be golf-specific?
Technically any short-throw projector with a suitable throw ratio can work, but golf-specific models are tuned for the room depths and lumen needs simulator bays actually have. Two examples that get mentioned but aren't golf-specific — the Epson Home Cinema 3800 (standard throw, needs 15+ ft of depth) and the AWOL Vision LTV-3500 Pro (a premium home-theater UST unit with no golf-specific track record) — illustrate why: neither is built around the throw-ratio and lumen tradeoffs a simulator room actually needs.
What ceiling height do I need, and should I ceiling-mount or floor-mount?
Ceiling mounting is the safer, more common choice — a floor-mounted projector sits closer to the path of a mis-hit ball or club follow-through. Community mounting experience on GolfSimulatorForum backs this consistently (see the buying guide above); a rough rule of thumb from that community is to center the mount over the hitting line, positioned roughly two feet closer to the screen than the hitting area, with at least 8-9 ft of ceiling height as a starting point.
What is the difference between short throw and ultra-short throw (UST)?
Short-throw projectors have a throw ratio of roughly 0.6-0.9:1; ultra-short-throw (UST) projectors are 0.4-0.5:1 or lower. The lower the ratio, the closer the projector can sit to the screen for a given image size — UST models like the GT2000HDR and ZH450ST in this roundup (0.496:1) fit rooms as shallow as 8-9 ft, while short-throw models — including the AK700ST — in the 0.69-0.89:1 range need 11-14 ft.
Should I buy a laser or lamp projector?
Laser, if the budget allows it — it holds its rated brightness for 20,000+ hours with no bulb replacement cost, versus a lamp projector's 3,000-5,000 hour life, gradual dimming, and $200-400 replacement lamps. The TH671ST is the one lamp-based pick in this roundup, chosen specifically for its lower upfront price.
More Accessory Guides
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission at no extra cost to you. Our rankings and verdicts are not influenced by commercial relationships. Full disclosure policy
Get Price Alerts and New Reviews
We track price changes across launch monitors and simulator accessories. Subscribe for alerts when prices drop or new picks are added.